Table of Contents
Advertisement
As shown in the figure on the right, the minimum length L of the clamps is 50mm.
Middle modules installation
Figure 5: PV module installed at the side with Clamp fitting method
Clamp type
End Clamp
(40 mm thickness)
End Clamp
(35 mm thickness)
End Clamp
(30 mm thickness)
Middle Clamp
(40 mm & 35 mm
thickness)
Middle Clamp
(30 mm thickness)
Table 4: Mechanical dimensions, specification and material when modules installed with mid Clamp
When installing modules using clamps on the long side of the frame, the applicable product types and
installation locations are shown in figure 6 and table 5.
When installing modules using clamps on the short side of the frame, the applicable product types and
Fringe modules installation
Dimension(mm)
39 x 50 x 42
39 x 60 x 42(For 1.5mm thickness frame)
41.5 x 50 x 40
41.5 x 50 x 35
42 x 50 x 28
42 x 60 x 28(For 1.5mm thickness frame)
Q
R
13.5
15
42 x 50 x 29.5
Q
R
14
14
-11-
Composition material
Aluminum-alloy
P
2.5
P
3
Advertisement
Table of Contents
