Network - D-Link COVRAX COVR-X1860 Manual

Section 3 - Configuration
This section will allow you to change the local network settings of Covr Point A
and configure the DHCP settings. In the Settings menu on the bar on the top
of the page, click Network. Click Advanced Settings... to expand the list and
see all of the options.
Network Settings
LAN IP Address: Enter the IP address of Covr Point A. The default IP address is
192.168.0.1.
If you change the IP address, once you click Save, you will need
to enter the new IP address in your browser to get back into the
configuration utility.
Subnet Mask: Enter the subnet mask of the router. The default subnet mask is
255.255.255.0.
Management The default address to access the web configuration utility is
Link: http://covrXXXX.local/ where XXXX is the last for digits of the devices
MAC address.
Here, you can replace "covr" with a different name. If you change the
management link, you will be required to browse to the new URL in
order to access the web UI.
Local Domain Enter the domain name (optional).
Name:
Enable DNS Relay: Disable to transfer the DNS server information from your ISP to your
computers. If enabled, your computers will use Covr Point A for a
DNS server.
D-Link COVR-X1860 || COVR-X1862 || COVR-X1863 || COVR-X1864 User Manual

Network

43