Web Based Installation - D-Link COVRAX COVR-X1860 Manual

Section 2 - Installation
If you do not wish to use the D-Link Wi-Fi app, you can manually set up your Covr device and configure your Covr Wi-Fi network
using the web-based user interface.
Step 1
Position the Covr Point close to your Internet-connected modem and
connect an Ethernet cable to the modem and to INTERNET Port of the Covr
Point. Next, connect the power adapter and plug the Covr Point into a power
outlet.
Step 2
Wait for the Covr Point to boot up. When the COVR LED starts blinking
orange, wirelessly connect your computer to the Wi-Fi name (SSID) printed
on the bottom of the device, or on the included Quick Install Card.
Step 3
Type http://covr.local./ into a web browser and follow the on-screen
instructions to complete the setup.
Your Covr device is now set up and ready to use. You can now configure your Covr Wi-Fi settings using the free D-Link Wi-Fi
mobile app or the web-based user interface. Refer to the Configuration section on page page 11 for more information on
configuring your network using the web-based user interface.
D-Link COVR-X1860 || COVR-X1862 || COVR-X1863 || COVR-X1864 User Manual

Web Based Installation

Wi-Fi
QUICK INSTALL CARD
Wi-Fi
http://covr.local./
MODEM
SSID:
Password:
10