Table of Contents
Advertisement
Section 3 - Configuration
This page will allow you to backup, restore configuration settings, or restore
settings from a previous backup, reset, and set up a reboot schedule for the
device. On the System Admin page click System.
System
Save Settings To
Click Save to download a backup of your current configuration settings
Local Hard Drive:
to your local hard drive. This backup can later be used to restore your
settings.
Load Settings
Click Select File to browse your local hard drive for a configuration file
From Local Hard
to restore your configuration settings from. Once selected, click Restore
Drive:
to apply the settings from the configuration backup.
Restore To Factory
Click Restore to restore all configuration settings back to the settings
Default Settings:
that were in effect at the time the device was shipped from the factory.
Any settings that have not been saved will be lost, including any rules
that you have created.
Auto Reboot Configuration
Reboot the
Click the Reboot to reboot the device immediately.
Device:
Auto Reboot:
Use the drop-down menu to select a schedule for the device to
automatically reboot. The schedule may be set to Never, Daily, or
Weekly. Depending on your selection, set a time and date for the
auto reboot schedule.
Click Save when you are done.
D-Link COVR-X1860 || COVR-X1862 || COVR-X1863 || COVR-X1864 User Manual
System
67
Hide quick links:
Advertisement
Table of Contents
