Upgrade - D-Link COVRAX COVR-X1860 Manual

Section 3 - Configuration
This page will allow you to upgrade the extender's firmware, either
automatically or manually. To manually upgrade the firmware, you must first
download the newest firmware file from http://support.dlink.com.
In the Management menu on the bar on the top of the page, click Upgrade.
Firmware Information
Master: Displays the current firmware version for Covr Point A.
Check for New Click this button to prompt the extender to automatically check for a new
Firmware: firmware version. If a newer version is found, click Upgrade Firmware
to download and install the new firmware.
Upgrade Manually

Upgrade

If you wish to upgrade manually, first download the firmware file you
Firmware: wish to upgrade to. Next, select a device from the drop-down menu to
upgrade firmware for. Then, click the Select File button and browse to
the firmware file you want to install. With the file selected, click Upload
to begin the upgrade process.
D-Link COVR-X1860 || COVR-X1862 || COVR-X1863 || COVR-X1864 User Manual
Upgrade
69