Digital Watchdog Starlight D1363D922 User Manual page 6

INSTALLATION
A. Loosen the fixing screw using the L-Wrench.
B. Separate the upper case and base case.
C. Loosen the inner screws using a screwdriver.
D. Detach the gimbal from the base case.
E. Cut a hole in the ceiling for routing the cables.
F. Place the camera horizontally on the ceiling.
Drill the screw holes at the marked two positions.
G. Pass the power cable and video cable from the
camera unit through the cable hole in the ceiling.
H. Align the screw holes of the camera unit with the
holes in the ceiling.
Secure the camera with the two screws.
I. Fix the gimbal to the base.
J. Install and adjust the camera unit.
K. Adjust the dome to show the lens through the
camera window. Attach to the base.
L. Put the upper case and the base together
M. Tighten the screw to fasten the upper case and
base case.