Lumie Sunrise Alarm - Wake-up Alarm Clock Manual

Getting started

The ideal place for Sunrise Alarm is on a bedside table near a mains socket.

• Connect the mains power adaptor to the socket on the back of the unit.
• Plug into a mains power supply.
  Set the current time when the display flashes. If it stops flashing, press on the back panel.
  The hours will flash.
• Use or to set the hours.
• Press on the back panel to confirm and continue. The minutes will flash.
• Use or to set the minutes.
• Press on the back panel to confirm and continue.
• Use or to choose 4H or 1H.
• Press T on the back panel to confirm and exit to the current time.

To change the current time

• Press on the back panel and set the time as above.

Front panel

Back panel

Setting the alarm time

Changing the wake sound

Sunrise Alarm is preset to wake sound 6, Beep:

• Presson the back panel.
  The saved wake sound will play.
• Use or to set a wake sound for the end of the sunrise:
  1 Blackbird, Osprey, 3 Goats, 4 Tree frogs, 5 Kitten purring, 6 Beep.
• Press to confirm and exit to the current time; otherwise the wake sound is saved after 4 seconds.

To change the wake sound volume
Sunrise Alarm wake sound volume is preset to 5.

• Press or on the back panel.
  The saved volume will show on the display.
• Use or to set the volume: 00 for off/no wake sound or a level from 01 to 10.
  The volume is saved after 4 seconds.

Using the sunrise alarm

The sunrise starts 30 minutes before your alarm time, gradually increasing to reach full brightness at your alarm time. You need to activate the alarm before you go to sleep.

To activate the sunrise alarm

• Press .
  The display confirms the alarm time and shows B to confirm the alarm is activated; for example:
  

To deactivate the sunrise alarm

Using the fading sunset

When you're ready to sleep, a fading sunset can help you to relax and unwind.

To start the sunset

Bedside light

Sunrise Alarm can be used as a dimmable or coloured bedside light.

• Pressto turn on white light.
• Use or to adjust the light level.
• Press again to change to coloured light.
  The colour will start to change after 4 seconds: green, red, blue, pink, orange, light blue.
• Use or to choose single colour light.
• Press a third time to turn off the light.

Display brightness

• Presson the back panel.
• Pressagain to choose display brightness: high, low or off.

Power failure back-up

Sunrise Alarm can be fitted with batteries to provide a back-up power source if the electrical power supply fails.

• Insert 3 x AAA batteries into the compartment in the base of the unit.
  All settings will be saved. To conserve power, only the essential features will be available:
• Clock.
• Alarm with wake sound alarm only, no sunrise.
• None of the lighting features are available.
• The display turns off after 15 seconds. Press any button to turn on.

Maintenance

LED lifetime
The LEDs in this product will typically last for many years, even with several hours use each day. Although it's unlikely, it's possible for individual LEDs to fail. This will make only a negligible difference to light output and you can continue to use the product.

Warranty

This unit is covered under warranty against any manufacturing defect for 3 years from the date of purchase. This is in addition to your statutory rights. If you need to return the product for servicing, use the original packaging (including internal packing) if possible. Make sure the mains power adaptor is prevented from moving in transit and damaging the unit. If the unit is received damaged, through misuse or accidental damage, then we may have to charge to repair it; we will contact you first. Please contact Lumie for further advice.
Serial number (see base of unit)

Technical description

Subject to change without notice.

Lumie Sunrise Alarm
This product contains a light source of energy efficiency class G.
Detachable accessory: Mains power adaptor (supplied)
Input: 100–40 Vac, 50/60 Hz, 0.5 A max.;
Output: 5 V ⎓ 1 A (5 W)
Operating conditions:
Temperature: 5°C to 35°C
Relative humidity: 15% to 3% (non-condensing) Atmospheric pressure: 0 kPa to 106 kPa
Storage/transport conditions:
Temperature: -5°C to +0°C
Relative humidity: 15% to 3% (non-condensing) Atmospheric pressure: 5 kPa to 106 kPa
European Declaration of Conformity
Class III electrical equipment
AC (alternating current) power supply

Contact us

If you have any questions or problems regarding this product, or have suggestions that you feel could help us improve our products or service please email info@lumie.com.
Outside In (Cambridge) Limited, 3 The Links, Trafalgar Way, Bar Hill, Cambridge, CB3 UD, UK.
Lumie is a registered trademark of:
Outside In (Cambridge) Limited, incorporated in England and Wales.
Registered Number: 6435. VAT No: GB 0 3 1.