Table of Contents
Advertisement
Installing the Wall mount
i
Press the [Enter] button to start auto adjustment
When auto adjustment is complete, use Quick Corner ( p.70) to make further adjustments. Using Arc
Correction or Point Correction returns the image to the status before auto correction was performed.
Performing mechanical adjustment using the Setting Plate Installation Guide
Use the guidance screen to adjust the position of the image.
a
Press the [Menu] button
Using the Remote Control
b
Select Setting Plate Installation Guide from the Installation menu
You see the guidance screen.
c
Turn the adjustment dial
Using the Control Panel
in the installation guide to adjust the horizontal roll
65
Advertisement
Table of Contents
