Attaching The Setting Plate To The Wall Plate - Epson EB-1460Ui Installation Manual

Installation Guide

Attaching the setting plate to the wall plate

a
Insert the hexagonal axis into the setting plate
b
Mount the setting plate to the wall plate
Insert the top of the hexagonal axis into the wall plate, and then insert it into the slot at the bottom.
Caution
•
Do not wire the Touch Unit connection cable into the wall (EB-1460Ui/EB-1450Ui only). If it is wired
into the wall, it cannot be connected to the Touch Unit.
•
Take care not to trap the cables between the setting plate and wall plate.
42