Operation - Kärcher K 7.300 Manual

Operation

Scope of delivery
The scope of delivery of your appliance is il-
lustrated on the packaging. Check the con-
tents of the appliance for completeness
when unpacking.
In the event of missing accessories or any
transport damage, please contact your
dealer.
Description of the Appliance
These operating instructions describe the
basic models of the high pressure cleaners
shown on the front cover.
These operating instructions describe the
maximum equipment. Depending on the
model, there are differences in the scopes
of delivery (see packaging).
Illustrations on fold-out
pages!
1 Coupling element for
water connection
2 Water connection with integrated sieve
3 Appliance switch "0/OFF"/ „I/ON"
4 High pressure hose
5 Dosage regulator for detergent
6 Storage for trigger gun
7 High-pressure hose drum
8 Transport handle
9 Hand crank for hose drum
10 Storage of Plug 'n' Clean detergent bot-
tle with detergent connection
11 Storage for accessories
12 Option
Storage hook for mains connection ca-
ble
13 Option
Automatic coiling for mains cable
14 Mains cable with mains plug
15 Plug 'n' Clean detergent bottle with
locking lid
16 Wheels
17 Trigger gun
18 Lock trigger gun
19 Key to detach the high pressure hose
from the trigger gun
20 Washing brush
18
21 Spray lance with Dirtblaster
22 Spray lance with pressure regulation
(Vario Power)
Special accessories
Special accessories expand the possibili-
ties of using your appliance. Please contact
your KÄRCHER dealer for further informa-
tion.
Before Startup
Mount loose parts delivered with appliance
prior to start-up.
Install the storage for hand-spray gun
Illustration
 Place the bottom holder into the recess-
es and push forward until it audibly
locks in.
Illustration
 Insert the top holder and push down all
the way.
Install the storage hook for the mains
connection cable
Option
Illustration
 Install the top storage hook.
Install the dosage regulator for
detergent
You will need the 2 included screws as well
as a Philips screwdriver PH 2.
Illustration
 Insert both detergent hoses onto the
hose fittings.
 Install the dosage regulator and con-
nect using 2 screws.
Install the transport handle
Illustration
 Wind up the high-pressure hose on the
hose drum.
Illustration
 Slide the free end of the coiled high
pressure hose through the recesses on
the dosage regulator.
Illustration
 Attach the transport handle, insert the
bolts into the bores and screw them in.
Illustration
 Press the connecting fitting from the
short high pressure hose into the brass
intake until it locks into place audibly.
– 8
EN