Operation - Kärcher K 7.91 M Operating Instructions Manual

Operation

Scope of delivery
The scope of delivery of your appliance is il-
lustrated on the packaging. Check the con-
tents of the appliance for completeness
when unpacking.
In the event of missing accessories or any
transport damage, please contact your
dealer.
Description of the Appliance
These operating instructions describe the
maximum equipment. Depending on the
model, there are differences in the scopes
of delivery (see packaging).
Illustrations on Page 4
1 Water connection
2 Fine filter in the water
connection
3 Coupling element for water connection
4 Quick coupling for high pressure hose
5 High pressure connection
6 Appliance switch "0/OFF"/ „I/ON"
7 Detergent Tank
8 Dosage regulator for detergent
9 Storage for trigger gun
10 Detergent suction hose (with sieve)
11 Transport handle
12 Storage for high-pressure hose
13 Storage for accessories
14 Mains cable with mains plug
15 Bearing wheel
16 Lock trigger gun
17 Trigger gun
18 Key to detach the high pressure hose
from the trigger gun
19 High pressure hose
20 Washing brush
21 Spray lance with Dirtblaster
22 Spray lance with pressure regulation
(Vario Power)
Special accessories
Special accessories expand the possibilities
of using your appliance. Please contact your
KÄRCHER dealer for further information.
Before Startup
Mount loose parts delivered with appliance
prior to start-up.
Illustrations on fold-out
pages!
Illustration
 Insert the transport handle and screw in.
 Insert holder for trigger gun.
Illustration
 Connect the suction hose for detergent
to the dosage regulator.
Illustration
 Lock the dosage regulator for detergent
into the cover.
Illustration
 Insert the cover and screw in.
Illustration
 Pull the suction hose for detergent
through the cover of the detergent tank
until the filter contacts the bottom of the
tank.
Illustration
 Close the detergent tank with the lid.
 Lock the detergent tank in place on the
appliance.
Illustration
 Attach the accessories holder.
Illustration
 Fasten the quick coupling for the high
pressure hose to the high pressure con-
nection.
– 8
EN 17