Table of Contents
Advertisement
Tr blesh ting
WARNING:
!
To reduce the risk of electric shock, turn power OFF and disconnect polarized plug from electrical outlet before
performing maintenance or troubleshooting.
Vacuum cleaner won't turn on...
Possible causes
Power cord not plugged in
Blown fuse/tripped breaker in home
Vacuum cleaner doesn't have good suction...
Possible causes
Hose not properly positioned
Dirt tank not installed properly
Dirt tank is full
Clog in cleaner
Filters are dirty
Hose not properly attached
Vacuum is not suctioning or
blowing
Other maintenance or service not included in the
manual should be performed by an authorized service
representative.
Thank you for selecting a BISSELL brand product.
Please do
If you should happen to need assistance during assembly or
operation, call BISSELL Consumer Care at
not return
this product
For any questions or concerns, BISSELL is
happy to be of service. Contact us directly at
to the store.
1-800-263-2535
Remedies
Check electrical plug
Check/replace fuse or reset breaker
Remedies
Make sure hose is fully connected to
base and body. Be sure to hold onto
plastic hose collar while connecting
hose.
Check assembly of upper and lower
portions, correctly position and secure
into place
Empty dirt tank
Follow instructions on pg. 10 and 11 for
clearing clogs
Check and clean filter
Make sure hose collar is properly
installed
Make sure hose collar is properly
installed
1-800-263-2535.
.
WWW.BISSELL.CA
1-800-263-2535
11
Advertisement
Table of Contents
