Table of Contents
Advertisement
Machine Set-up Guide
!
PLEASE READ BEFORE COMMENCING ANY OPERATION AFTER THE REMOVAL OF
ALL THE PACKAGING, CAREFULLY OPEN AND CHECK THE CONTENTS.
TTB1840G CONTENTS
● Owner Manual
● Battery Charger & Lead
● Battery Pack ● Scrub Brush
● Squeegee Assembly
3
Slide the brush / pad under the brush
deck (Fig.3).
6
Fit the battery to the machine (Fig.6) and plug in the power supply (Fig.7).
Ensure the battery has been charged before use.
1
Using the handle position lever, (Fig.1) move the handle into the upright position, (Fig.2)
4
Fit the brush / pad onto the Nulock drive
chuck, twist to lock the brush / pad in
place (Fig.4).
7
2
5
Swing the floor-tool carrier from behind
the brush. Using the two locking knobs
fitted to the floor-tool, secure to the floor-
tool to the floor-tool carrier (Fig.5).
8
Fill the clean-water to a Max of 18 litres
T 01460 68600
!
7
Advertisement
Table of Contents
