Wiring Of Dc Wires From Battery To Inverter - Ingecon SUN STORAGE 100TL Use And Settings

Ingeteam
Also, DI2 of the HV BOX and DO1 of the Combiner Box must be short circuited.
2.2.2

Wiring of DC wires from battery to inverter

Please, consider the following technical notes:
1) The inverter must be OFF before connecting the battery to the inverter.
2) Connect the DC power wires with a section between 12-35mm
DC wiring must have terminals on the inverter side. It must connect the P+ and P- terminals of
the HV BOX with the inverter terminals. It must be connected to the inverter as follows:
1. Pass the wires through the dedicated cable grommet, respecting the polarities.
2. Remove the bolts and connect the wiring to the terminals.
3. Tighten the bolts with a torque of 28Nm.
4. Chech that the connection is tight.
ABS2015IMC04_.docx
DI2 HV BOX
DO1 Combiner BOX
ISS 100TL
2
.
24