Ingeteam
2.2 TWO OR MORE TOWER OF BATTERIES
For this type of installations, a HV BOX for each battery tower, a Combiner Box for the
parallelization of the DC and the desired battery modules will be necessary.
2.2.1
Wiring of Battery DC wire
The battery modules must be connected so the positive and negative end in the B+ and B-
terminals of the HV BOX. Then, each HV BOX must be wired to the Combiner Box input. Like
the following image:
The Combiner Box needs an auxiliar power supply of 24V that it will be connected to this port:
ABS2015IMC04_.docx
23