Wiring Of Dc Wires From Battery To Inverter - Ingecon SUN STORAGE 100TL Use And Settings

Ingeteam
2.1.2

Wiring of DC wires from battery to inverter

Please, consider the following technical notes:
1) The inverter must be OFF before connecting the battery to the inverter.
2) Connect the DC power wires with a section between 12-35mm
DC wiring must have terminals on the inverter side. It must connect the P+ and P- terminals of
the HV BOX with the inverter terminals. It must be connected to the inverter as follows:
1. Pass the wires through the dedicated cable grommet, respecting the polarities.
2. Remove the bolts and connect the wiring to the terminals.
3. Tighten the bolts with a torque of 28Nm.
4. Chech that the connection is tight.
ABS2015IMC04_.docx
ISS 100TL
2
.
19