Ingeteam
2. 5K3 XP BATTERY
This chapter describes the process of connection, switch on and configuration of the ISS 100TL
to work with 5K3 XP battery.
Depending on the number of batteries in parallel, the connections will be done in different ways.
2.1 ONE TOWER OF BATTERIES
For this type of installations, a HV BOX and the desired battery modules will be necessary.
2.1.1
Wiring of Battery DC wire
The battery modules must be connected so the positive and negative end in the B+ and B-
terminals of the HV BOX. Similar as the following image:
Also, DI2 of the HV BOX must be short circuited.
ABS2015IMC04_.docx
18