Wiring Of Can Communication Cable Between Battery Modules; Wiring Of The Can Communication Cable Between Battery And Inverter - Ingecon SUN STORAGE 100TL Use And Settings

Ingeteam
2.1.3

Wiring of CAN communication cable between battery modules

The communication between modules must connect the CAN-A port with the CAN-B port of the
next modules. The CAN-B port of the first module must be connected to the CAN 1-B of the HV
BOX. In the CAN port of the last module, an ended resistance must be connected. Similar to the
following image:
2.1.4

Wiring of the CAN communication cable between battery and inverter

The communication between battery and inverter is done with a cable that connects the port
CAN 2-A of the HV BOX with the inverter.
ABS2015IMC04_.docx 20