Know Your Machine - Nilfisk-Advance Nilisk-Alto 866 Service Manual

Service Manual: Clarke Focus II Midsize, Nilisk-Alto ScrubTec

KNOW YOUR MACHINE

MACHINE CONTROL PANEL
Figure 1 – Machine Control Panel
Key Switch (See Figure 1, Item "A") The key switch turns "ON" the power to the control panel. "O" is "OFF" and "I" is
"ON".
Traverse Speed Switch (Speed Control Poteniometer) (See Figure #1, Item "B") The speed control varies from low to
high speed. To increase the speed, turn the knob to the right. To decrease the speed, turn the knob to the let.
One Touch Control Buton (See Figure 1, Item "C") The one touch control buton raises and lowers the brush head
assembly, starts and stops the vacuum motor automaically. Press the one touch control buton once and the brush head
assembly lowers to the loor and the vacuum motor turns "ON" (brush head and vacuum LEDs illuminate green). The
brush motors start when the brushes are down and the forward palm buton is depressed. Press the one touch control
buton again and the brush head assembly raises, the vacuum motor will remain on for 10 seconds and then shut "OFF".
Increase Brush Pressure Buton (See Figure 1, Item D) This buton is used to increase the brush pressure. Increased
brush pressure may be required when stripping or cleaning heavily soiled loors. To increase brush pressure, irst
Form Number 56043117
Page 8