Advertisement
The instruction consists of 3 parts. Part 1:3 Safety
Instructions. Part 2:3 User Guide. Part 3:3 Technical
Data and Declaration.
Part 1:3 - Safety Instructions
Before first use of the machine, read the instruc-
tions carefully. Save instructions for later use.
Safety instructions marked with this symbol
must be observed to prevent personal injury
or serious damage to property.
WARNING
This machine has been designed for use with
cleaning agents supplied or recommended by Nilfisk.
The use of other cleaning agents or chemicals may
adversely affect the safety of the machine.
High pressure jets can be dangerous if
subject to misuse. The jet must not be direct-
ed at persons, live electrical equipment or
the machine itself.
Do not use the machine within range of persons
unless they wear protective clothes.
Do not direct the jet against yourself or others in
order to clean footwear.
Risk of explosion – Do not spray flammable liq-
uids.
High pressure washers shall not be used
by children or untrained personnel.
High pressure hoses, fittings and couplings are
important for the safety of the machine. Use only
hoses, fittings and couplings recommended by Nil-
fisk.
To ensure machine safety, use only original spare
parts recommended by Nilfisk.
Water that has flown through back-flow preven-
ters is considered to be non-potable.
Don't use the machine if a supply cord or impor-
tant parts of the machine are damaged, e.g. safety
devices, high pressure hoses, trigger gun.
Inadequate extension cords can be dange rous.
If an extension cord is used, it shall be suitable for
outdoor use, and the connection has to be kept dry
and off the ground. It is recommended that this is
accomplished by a cord reel which keeps the sock-
et at least 60 mm above the ground.
Switch off and unplug the machine when leaving
it unattended, when finished using it or when con-
verting it to another function, when doing repair and
maintenance.
During use of high pressure washers, aerosols
may be formed. Inhalation of aerosols can be haz-
ardous to health, for the protection against aerosols
a respiratory mask of class FFP 2 or equivalent may
be needed, depending on the cleaning environment.
2
Intended Use and Terms of Liability
• The C-, D-, E- and P-series have been developed
for domestic cleaning pur poses only and for use
in an upright position. Any other use is considered
as improper use.
• A high pressure washer operates with different
levels of pressure and cleaning detergents for
various cleaning tasks and results. Always follow
instructions on detergents for use, emergency
and disposal.
• Do not operate the machine at temperatures be-
low 0°C. Never start a frozen machine, never use
it indoor and never cover it during use. This is
considered improper and wrongful use. Use of
wrongful pressure, detergent and/or applications
may cause damage to machine, surfaces, material
and devices.
All of the above is considered improper and wrong-
ful use. Nilfisk accepts no liability for any damage
resulting from any improper or wrongful use.
Please refer to our website at www.get-started.nilfisk.
com for further instructions and information on use,
emergency and disposal.
Safety devices and their functioning
The machine automa tically stops when releasing
the trigger. The machine will start again when re-
activating the trigger. The spray handle features a
locking device. When activated, the spray handle
cannot be operated.
The machine has an automatic self-resetting thermal
protector. If the machine is overheated, the thermal
protector will cut the power supply. In this case, wait
for the machine to cool down. An integrated hydrau-
lic safety valve protects the system from excessive
pressure.
Precautions
The electric supply connection shall be made by a
qualified electrician and comply with IEC 60364-1.
It is recommended that the electric supply to this
machine should include either a residual current
device that will interrupt the supply if the leakage
current to earth exceeds 30 mA for 30 ms or a device
that will prove earth circuit.
• Use motor start/delayed fuses with characteristic D
according to IEC 947-2 or corresponding standards
outside IEC.
• If the supply cord is damaged, it must be replaced
by an authorized Nilfisk distributor or similar qual-
ified person in order to avoid a hazard.
• No actions needed for adjusting machines marked
with dual voltage and frequency.
• Supervise children not to play with the machine.
Original instructions
Advertisement
