TEFAL Cake Factory Manual page 18

C. Using the Manual Program
1
3
5
7
34
1. Once the cooking program is
selected, the corresponding
indicator light is solidly lit.
2. A default temperature flashes.
3. Press the + and – buttons to
modify the temperature, if
required.
4. Press the OK button to confirm.
2
5. A predefined cooking time
flashes.
6. Press the + and – buttons to
modify the time, if required.
7. Press the Start button to confirm
and start cooking, and the time
display will stop flashing.
8. Cooking has started. The graphic
on the screen's left indicates that
4
a cooking cycle is underway and
that the appliance is heating.
The time counts down by the
minute, and then by the second
during the last minute.
Note: Each subsequent time the
appliance is used, the time and
temperature displayed default to the
6 previous time and temperature used.
8
D. End of a Program
(Automatic or Manual)
1 2
1. The time reaches 000 and the appliance beeps to signal the end of cooking.
2. Press OK once to stop the ring, the display 000 flashes.
3. The use of hand protection (oven glove) to prevent burns when handling hot dishes or moulds
is necessary.
Caution: It is important to open the appliance and to quickly remove the cakes so that they do
not continue to cook.
E. Extend a Cooking Cycle
1
3
3
(Automatic or Manual)
1. At the end of the program, in
the event where the cake is
undercooked, it is possible to
increase the cooking time by
directly pressing the + and -
buttons. Close the cover again.
2. Once the additional time has
been entered, press Start to
2
continue cooking.
3. The time display stops flashing
and the minute-by-minute
countdown starts.
continues. The graphic on the
screen's left indicates that a
cooking cycle is under way and
that the appliance is heating.
Cooking
35