Table of Contents
Advertisement
5.
With the printing side facing downwards, into the printer and the
left edge aligned with the Paper Guide (1), carefully insert the
paper on the Paper Tray (2) into the printer until it is gripped.
Insert the paper with both hands and push it in gently.
NOTE
•
When a pasted billing slip is peeled off and used, bending of
the sheet may occur after printing (or at the time of feeding) due
to the paste remaining on the top of the slip. So, at the time of
peeling off, remove the paste and straighten out the curl.
•
Crease may occur when thinner media than standard ones like
A4 feather paper are used.
•
When thin media are used, the sheet may be rolled into the
roller after ejecting. Remove the ejected paper before starting
the next printing, or the ejected paper may be rolled into the
roller.
•
Do not print on the printing prohibited portion at the bottom of
the paper. Such printing may result in irregular printing, damage
to the media or jam.
•
Ensure that the paper is accurately aligned along the Paper
Guide to avoid the possibility of skew printing.
• When printing an envelope, do not fold up the flap. A flap
aligned along the Paper Guide can lead to skew printing.
ML1120/ML1190 User's Guide - Paper handling > 23
1
2
Advertisement
Table of Contents
