Chapter 2: Removing And Installing Components; Recommended Tools; Screw List - Dell Precision 5480 Service Manual
Hide thumbs
Also See for Precision 5480:
- Quick start manual ,
- Owner's manual (106 pages) ,
- Technical manualbook (48 pages)
Table of Contents
Advertisement
Removing and installing components
NOTE:
The images in this document may differ from your computer depending on the configuration you ordered.
Recommended tools
The procedures in this document may require the following tools:
● Phillips screwdriver #0
● Phillips screwdriver #1
● Torx #5 (T5) screwdriver
● Plastic scribe
Screw list
NOTE:
When removing screws from a component, it is recommended to note the screw type, the quantity of screws, and
then place them in a screw storage box. This is to ensure that the correct number of screws and correct screw type is
restored when the component is replaced.
NOTE:
Some computers have magnetic surfaces. Ensure that the screws are not left attached to such surfaces when
replacing a component.
NOTE:
Screw color may vary with the configuration ordered.
Table 1. Screw list
Component
Base cover
M.2 2230 solid state drive
NOTE:
For computers
shipped with M.2 2230 solid
state drive.
M.2 2280 solid state drive
NOTE:
For computers
shipped with M.2 2280 solid
state drive.
Battery
Left fan
Right fan
10
Removing and installing components
Screw type
T5, M2x3
M2x2
M2x2
M2x4
M2x4
M2x4
Quantity
8
2
1
5
2
2
Screw image
2
Advertisement
Table of Contents
