Steps
1. Align and place the smart-card reader into its slot on the palm-rest and keyboard assembly.
2. Replace the two (M1.6x1.7) screws to secure the smart-card reader to the palm-rest and keyboard assembly.
3. Adhere the smart-card reader FFC to the palmrest and keyboard assembly.
4. Connect the smart-card reader FFC to the connector on the USH board.
Next steps
1. Install the speakers.
2. Install the battery.
3. Install the
base
cover.
4. Follow the procedure in
Display assembly
Removing the display assembly
Prerequisites
1. Follow the procedure in
2. Remove the
base
cover.
About this task
The figure indicates the location of the display assembly and provides a visual representation of the removal procedure.
38
Removing and installing components
after working inside your
Before working inside your
computer.
computer.