Speakers; Removing The Speaker - Dell Precision 5480 Service Manual

Steps
1. Align and place the audio jack in its slot on the palm-rest and keyboard assembly.
2. Connect the audio jack FPC to its connector on the system board.
3. Replace the (M1.6x3) screw to secure the audio jack to the system board.
4. Align and place the left USB Type-C bracket on the system board.
5. Replace the three (M2x4) screws that secure the left USB Type-C bracket to the system board.
Next steps
1. Install the base cover.
2. Follow the procedure in

Speakers

Removing the speaker

Prerequisites
1. Follow the procedure in
2. Remove the base cover.
3. Remove the battery.
About this task
The figure indicates the location of the speaker and provides a visual representation of the removal procedure.
34 Removing and installing components
After working inside your
Before working inside your
computer.
computer.