Problem And Solution - Linea 2000 DOMO DO7296S Instruction Booklet

CLEAN ROTATING FLOOR BRUSH
Open the cover of the floor brush. Wipe the cover clean with a soft cloth. Remove the rotating floor brush.
Remove hairs and other dirt that have wrapped around the floor brush. If you do not clean the floor brush
regularly, it will become damaged and your machine will become unusable. Rinse the brush under running
water. Let it dry before putting it back in place.
STORAGE
If you do not use the device for a long period of time:
· Remove the batteries from the remote control
· Fully charge the battery, turn off the power switch, and store the device in a dry place
· If the device has not been used for 3 months or more, charge the battery for 5 hours before using.

PROBLEM AND SOLUTION

PROBLEM
The vacuum cleaner is not charging.
The vacuum cleaner has got itself stuck.
The vacuum cleaner will return to the charging
station without completing its cleaning
programme.
The vacuum cleaner is not carrying out its
automated cleaning mode as set.
www.domo-elektro.be
SOLUTION
· Make sure there is contact between the
charging station and the main housing.
· Ensure that the on/off switch on the side of
the appliance is on at all times, otherwise the
appliance will not be able to charge.
· Ensure the adapter is plugged into a socket
and connected to the charging station,
otherwise the vacuum cleaner will not be able
to find the charging station.
Move the vacuum cleaner so it is no longer stuck.
The vacuum cleaner's battery is almost empty,
allow the appliance to charge.
· Turn the appliance on.
· Allow the vacuum cleaner to charge fully first.
· Switch the appliance off and thoroughly clean
the dust collector as well as the side brushes
and the wheels before putting the appliance
back to work.
71
DO7296S