Linea 2000 DOMO DO7296S Instruction Booklet page 65

Robot vacuum cleaner
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 57
6.
Confirmation button/pause button
·
This button can be used to start automatic cleaning when the appliance is in standby mode. The
vacuum cleaner will plot its own path to vacuum the entire room, and will avoid walls, obstacles, and
stairs.
·
When the battery is almost empty, or when the appliance has finished its programme, the vacuum
cleaner will automatically return to the charging station if one has been installed. If no charging
station is installed, the vacuum cleaner will enter standby mode.
·
You can also make the appliance stop cleaning. To do this, press the on/off switch. Switch the
appliance off using the on/off switch on the side of the appliance.
·
Use this button to confirm your settings.
·
This button can also be used to pause the vacuum cleaner. If you press this button again, the appliance
will continue to complete its programme.
7.
Suction level adjustment
Use this button to set the suction level. A symbol for the selected setting will be shown on the display.
8.
Clock settings
·
Press this button to set the clock.
·
The hours on the display will flash. Set the hours by pressing the up or down arrows.
·
Then press the right arrow to set the minutes. The minutes on the display begin to flash. Set the
minutes by pressing the up or down arrows.
·
Press the confirmation button to confirm the time.
9.
Wall-guided cleaning
Press this button to set a route where the vacuum cleaner cleans along walls and also cleans corners.
10. Schedule settings button
Use this button to programme the robot vacuum cleaner to automatically vacuum at a set time every day.
For example, if you set the vacuum cleaner for 09:30, it will start to clean at 09:30 every day.
·
Press the schedule settings button.
·
Set the clock using the arrow buttons.
·
Then select the desired suction level.
·
Press the confirmation button to confirm the setting.
·
The display will show the icon at all times, so that you know this setting is in place.
To cancel this setting, press and hold the schedule settings button for several seconds until the icon
disappears from the display.
www.domo-elektro.be
65
DO7296S

Advertisement

Table of Contents
loading

Table of Contents