Operation; Function Setting - Ribao BC2000-US Series Operation Instructions Manual



Operation

1) If AUTO START is ON, the machine starts counting automatically when you place
the notes in the hopper.
2) If AUTO START is OFF, the machine will start work unless you press START.
3) LCD displays the notes number or value of the counted notes (in accordance with
the working mode)
4) When batch number is reached, the machine stops. If the AUTO START is ON,
when you take away the notes from the stacker, the machine continues counting; If
AUTO START is OFF, you need to press START key to start when notes are
removed.
5) When counting finishes
If ADD is ON, the counting result is the sum of this counting and previous

counting. In Value mode, the machine will show accumulation amount.
If ADD is OFF, it shows the current counting result only.


Function Setting


In Normal mode and Value mode ( Fig.1 , Fig.2), press SET key to enter into function
setting menu interface as Fig.4. Press ESC to go back to working mode.
When the machine enters into function setting menu, press
1) State mode setting: press SET to select ON→OFF→ON in turn. After setting, press ESC to exit setting
or continue the next setting.
2) Press key, the cursor moves to next line, that is width detection sensitivity setting: Press SET key
to select 5MM→OFF→3MM→4MM→5MM in turn. After setting , press ESC to exit or continue the next
setting, press to go back to previous setting.
3) Press key, the cursor moves to next line, that is double detection sensitivity setting: press SET key
to select A→L→S→H→OFF→A. After setting, press ESC to exit or continue the next setting, or press
to go back to previous setting.
4) Press key, the cursor moves to next line, that is UV detection sensivity setting: Press SET key to
Fig.4
or SET key to change setting.
9