Advertisement
Airplane Flight Manual
8
HANDLING SERVICE AND MAINTENANCE
8.1
INTRODUCTION
8.2
AIRPLANE INSPECTION PERIOD
8.3
AIRPLANE ALTERATIONS OR REPAIRS
8.4
GROUND HANDLING
8.5
CLEANING AND CARE
8.6
USE OF EXTERNAL POWER
8.1 INTRODUCTION
This section contains recommended procedures for proper ground
handling and servicing of the airplane. It also identifies certain
inspection and maintenance requirements which must be followed if
the airplane is to retain that new-plane performance and
dependability. It is wise to follow a planned schedule of lubrication
and preventive maintenance based on climatic and flying conditions
encountered.
Refer to Aircraft Maintenance Manual of ZENITH STOL CH 750 HB-
YRC for more/deeper information.
8.2 AIRPLANE INSPECTION PERIOD
See ZENITH STOL CH 750 HB-YRC Maintenance Manual latest
edition for details.
8.3 AIRPLANE ALTERATIONS OR REPAIRS
It is essential that the Experimental Association of Switzerland (EAS)
has to be contacted prior to any alterations on the airplane to ensure
that airworthiness of the plane is not violated.
Major repairs which may impair the airworthiness of the airplane
when improperly done must be proposed to the EAS for comment
and / or approval.
Issued: 01.02.2020
Zenith STOL CH 750
Revision 0, Dat. 01.02.2020
HB-YRC
Page 86-93
Advertisement
