Zenith STOL CH 750 Airplane Flight Manual page 40

Zenith STOL CH 750
PREFLIGHT INSPECTION (cntd)
G Horizontal stabilizer and elevator left side:
1. Check horizontal stabilizer for secure condition, structural integrity and
secure attachment
2. Check condition of elevator hinge and security splint
3. Check main elevator attachment bolt for security
4. Check free movement of elevator
5. Check upper and lower elevator control cable attachment for condition
and security
6. Check trim tab for security
7. Check trim tab pushrod for security and integrity
H Rudder:
1. Check rudder for secure condition and structural integrity
2. Check rudder hinges for secure attachment and free movement
3. Check free movement of rudder
4. Check rudder control cable attachment for condition and security
I Horizontal stabilizer and elevator right side:
1. Check horizontal stabilizer for secure condition, structural integrity and
secure attachment
2. Check condition of elevator hinge and security splint
J Rear fuselage left side:
1. Check rear fuselage skin for stress, cracks, dents and loose rivets
2. Check static port, must be free and unobstructed
K Right wing trailing edge and flaperon:
1. Check flaperon push rod for security, integrity and freedom
2. Check rear spar bolt for security
3. Check flaperon and hinges for structural condition and secure
attachment
4. Check free movement of flaperon
Issued: 01.02.2020
Airplane Flight Manual
Revision 0, Dat. 01.02.2020
HB-YRC
Page 40-93