Operation - RADLEY 5125-015 Manual

OPERATION

CUTTING HEIGHT ADJUSTMENT
WARNING: Switch the product off and wait until the blade has come to
a complete stop before adjusting the cutting height!
Adjust the cutting height according to the needs of your lawn. The cutting height
depends on the kind of lawn and its actual height. When mowing high grass, start
with the maximum cutting height and make a second cut with a lower cutting
height.
Press the lever towards the rear wheel (Fig. 6).
1.
Move forward or backward to adjust the cutting height.
2.
Release the lever and ensure it's engaged in the slot properly.
3.
WARNING: Ensure that the lever engages in the slot after each
adjustment.
NOTE: There are 6 cutting height levels available. The adjustable heights are
1" (25mm) to 3" (75mm).
FIG.6
GRASS CATCHER
WARNING: Do not attempt to use the product without the grass catcher
attached when collecting grass – danger of flying objects!
Switch the motor off and wait that the blade had come to a complete
stop before removing the grass catcher!
Always carry the grass catcher by its carry handle.
INDICATOR
The grass catcher is equipped with a full bag indicator that indicates the filling
progress during operation.
5125-015
FIG.7
14