Advertisement
before performing any maintenance or changing accessories,
when clearing a jammed fastener, when the tool is not in use,
when it is being handed to another person, and when it is left
unattended. Failure to comply may result in moderate injury or
damage to equipment.
side shields when operating the tool/compressor and verify that
others in the work area are also wearing safety glasses. Safety
glasses must conform to American National Standards Institute
(ANSI Z87. 1) requirements and must provide protection from
ying particles from the front and the sides.
Air-powered tools are loud, and the sound can cause hearing
damage. Always wear ear protection to prevent hearing damage
and loss. Failure to comply may result in moderate injury.
Recycle unwanted materials rather than disposing of them as waste. Sort the
tools, hoses, and packaging in speci c categories and take to the local recycling
center or dispose of in an environmentally safe way.
Some of the following symbols may appear on the tool.
Study these symbols and learn their meaning. Proper interpretation of
these s mbols
ill allo
Read operator's manual: To reduce the risk of injury,
user must read and understand operator's manual before
using this product.
Risk to hearing Always wear ear protection when using
this tool. Failure to do so may result in hearing loss.
Eye protection: Always wear safety goggles, safety
glasses with side shields, or a full- f a c e shield when
operating this product.
for more efficient and safer operation of this tool.
Wear safety glasses with
Advertisement
