Download Print this page

RADLEY 1282-201 Owner's Manual page 5

18 gauge pneuma tic brad nailer

Advertisement

Do not use oxygen or any other combustible or bottled gas
to power air-powered tools. Failure to observe this warning
can cause explosion and serious personal injury or death.
Use only the compressed air to power the air-powered
tools. Use a minimum of
the tool to the compressor. Failure to comply will result
in serious injury or loss of life.
Do not expose a compressor to rain. Store it indoors.
Disconnect the compressor from power source before servicing. Compressor
must be grounded. Do not use grounding adaptors.
Do not direct compressed air from the air hose towards
the user or other personnel.
Never directly inhale the air produced by the compressor.
Do not adjust the pressure switch or safety valve for any reason.
They have been preset at the factory for this compressor's maximum pressure
Tampering with the pressure switch or the safety valve may cause personal injury
or property damage.
The pump and the manifold generate high temperatures. In order
to avoid burns or other injuries, do not touch the pump, the manifold, or the transfer
tube while the compressor is running. Allow the parts to cool down before handling
or servicing. Keep children away from the compressor at all times.
Make sure the regulator is adjusted so that the
compressor outlet pressure is set lower than the maximum
operating pressure of the tool. Before starting the compressor,
pull the ring on the safety valve to make sure the valve moves
freely. Drain water from tank after each use. Do not weld or
repair tank. Relieve all pressure in the hose before removing
or attaching accessories.
' (7.6 m) of hose to connect
Oxygen
Hydrogen
Explosive
Combustible

Advertisement

loading