Riding Your Buzzaround Lite™ Scooter; Mounting - Golden Technologies Buzzaround Lite GB107 Owner's Manual

VI. RIDING YOUR Buzzaround Lite™

MOUNTING

For your first driving session, make certain that your Buzzaround Lite
starts out on a level surface and that you will continue driving on a level surface.
BEFORE GETTING ON YOUR BUZZAROUND LITE™
1. Check to be certain that the key has been removed from the key switch. See section V.
"Operation" in this manual. This will eliminate the possibility of accidentally activating
the paddle controls and causing injury to yourself and/or others.
2. Check to be certain that your Buzzaround Lite freewheel lever is in the engaged
position. See section V. "Operation" in this manual.
3. Flip up the armrest(s).
When getting on or off your Buzzaround Lite, keep your weight toward
the middle of the deck. Putting most or all of your weight on the edge of the deck may
cause an unstable condition.
GETTING ON YOUR BUZZAROUND LITE™
1. Position the seat for safe and easy mounting. Ensure that the seat is facing forward.
See Section V. "Operation."
2. Return tiller to full upright position if necessary.
3. Carefully place one foot on the approximate center of the deck and seat yourself
comfortably and securely on the seat.
4. Flip down the armrest(s).
5. Place the key into the key switch.
6. Rotate the key clockwise to the on position. See figures 12 and 13.
Figure 12. Key Switch (Off) Figure 13. Key Switch (On)
20