Riding Your Buzzaround Xl Scooter; Mounting - Golden Technologies Buzzaround XL GB117 Owner's Manual

Buzzaround XL_Owner's Manual

MOUNTING

For your first driving session, make certain that your Buzzaround XL™ starts
out on a level surface and that you will continue driving on a level surface.
BEFORE GETTING ON YOUR BUZZAROUND XL
1. Check to be certain that the key has been removed from the key switch. See section V.
"Operation" in this manual. This will eliminate the possibility of accidentally activating
the paddle controls and causing injury to yourself and/or others.
2. Check to be certain that your Buzzaround XL™ freewheel lever is in the engaged
position. See section V. "Operation" in this manual.
3. Flip up or remove the armrests.
When getting on or off your Buzzaround XL™, keep your weight toward the
middle of the deck. Putting most or all of your weight on the edge of the deck may cause an
unstable condition.
GETTING ON YOUR BUZZAROUND XL
1. Position the seat for safe and easy mounting. Ensure that the seat is facing forward. See
Section V. "Operation."
2. Return tiller to full upright position if necessary.
3. Carefully place one foot on the approximate center of the deck and seat yourself
comfortably and securely on the seat.
4. Flip down or replace the armrest(s.)
5. Place the key into the key switch.
6. Rotate the key clockwise to the on position. See figures 12 and 13.
Figure 12. Key Switch (Off)
21
VI. RIDING YOUR Buzzaround XL™
Figure 13. Key Switch (On)
RevB_060515