Riding Your Buzzaround - Golden Technologies buzzaround GB 101 Owner's Manual

Buzzaround Owner's Manual -

RIDING YOUR BUZZAROUND

MOUNTING
Note: For you first driving sessions, make certain that your Golden Buzzaround™
starts out on a level surface and that you will continue driving on a level surface.
To Get on Your Buzzaround
1. Stand behind your Buzzaround
2. Make certain that the brake handle is in the "Reverse" position.
3. Pull up on the seat rotate lever.
• This lever is normally located on the right-hand side of the seat.
• Pull the lever up, and position the seat in a comfortable position
for seating.
• Release the lever to lock the seat into one of the eight preset
locking positions.
WARNING: BE SURE YOUR SEAT IS LOCKED IN THE FORWARD POSITION BEFORE
OPERATING.
• Make certain that the seat is positioned for safe and easy
mounting.
• Position yourself in the seat.
• Use the seat rotate lever to position the seat in the fully forward
direction.
• Fasten your lap belt, if your Buzzaround is so equipped.
BASIC DRIVING
1. Make certain that you are seated safely and properly on your Buzzaround.
2. Turn the speed control dial fully counterclockwise to its slowest setting.
NOTE: Reverse movement of the scooter may not occur when the speed control
dial is set fully counterclockwise at its slowest setting, especially when the
batteries are not fully charged.
3. Insert the key into the keyhole.
4. Push the key all the way into the key receptacle to power the scooter.
Updated 092605
Page 15
™