Power-Button And I/O Board; Removing The Power-Button And I/O Board - Dell OptiPlex All-in-One Plus 7410 Owner's Manual

11. Install the memory.
12. Install the back cover.
13. Install the stand.
14. Follow the procedure in

Power-button and I/O board

Removing the power-button and I/O board

Prerequisites
1. Follow the procedure in
2. Remove the stand.
3. Remove the back cover.
4. Remove the system-board
5. Remove the I/O cover.
6. Remove the bottom cover.
7. Remove the I/O bracket.
About this task
The following image(s) indicate the location of the power-button and I/O board and provides a visual representation of the
removal procedure.
After working inside your
Before working inside your
shield.
computer.
computer.
Removing and installing Field Replaceable Units (FRUs) 97