Dell OptiPlex All-in-One Plus 7410 Owner's Manual page 111

Table 32. System setup options—Power menu (continued)
Power
Fan Control Override
Intel Speed Shift Technology
Table 33. System setup options—Security menu
Security
TPM 2.0 Security
TPM 2.0 Security On
Attestation Enable
Key Storage Enable
SHA-256
Clear
PPI ByPass for Clear Commands
Chassis intrusion
SMM Security Mitigation
Data Wipe on Next Boot
Start Data Wipe
Absolute
UEFI Boot Path Security
Firmware Device Tamper Detection
Enable Firmware Device Tamper Detection Enables or disables Firmware Device Tamper Detection or Firmware Device
By default, the Enabled in S4 and S5 option is enabled.
Enable or disable the fan control override feature.
By default, the option is disabled.
Enable or disable the Intel speed shift technology support.
By default, the Intel Speed Shift Technology option is enabled.
Enable or disable TPM 2.0 security options.
By default, the TPM 2.0 Security On option is enabled.
Enables to control whether the Trusted Platform Module (TPM) Endorsement
Hierarchy is available to the operating system.
By default, the Attestation Enable option is enabled.
Enables to control whether the Trusted Platform Module (TPM) Storage
Hierarchy is available to the operating system.
By default, the Key Storage Enable option is enabled.
BIOS and the TPM will use the SHA-256 hash algorithm to extend
measurements into the TPM PCRs during BIOS boot.
By default, the SHA-256 option is enabled.
Enables to clear the TPM owner information and returns the TPM to the
default state.
By default, the Clear option is disabled.
Controls the TPM Physical Presence Interface (PPI).
By default, the PPI ByPass for clear Commands option is disabled.
Controls the chassis intrusion feature.
By default, the option is disabled.
Enable or disable SMM Security Mitigation.
By default, the option is enabled.
Enable or disable the data wipe on next boot.
By default, the option is disabled.
Enable or disable or permanently disable the BIOS module interface of the
optional Absolute Persistence Module service from Absolute software.
By default, the option is enabled.
Controls whether or not the computer will prompt the user to enter the admin
password (if set) when booting to a UEFI boot device from the F12 boot menu.
By default, the Always Except Internal HDD option is enabled.
Tamper Detection (Silent).
BIOS setup 111