Panasonic KX-NS300 Programming Manual page 19

KX-DT300/KX-DT500
KX-NT300/KX-NT500
*1 The buttons shown in this column are from the KX-T7400 series.
Entering System Programming Mode
Using a PT to perform system programming allows an authorised extension user to set a wide range of PBX
features and parameters.
There are two levels of system programming that can be performed with a PT: administrator-level programming
and user-level programming.
Administrator Level:
Allows the programming of all settings accessible through PT programming.
PROGRAM/
PAUSE
User Level:
Allows the programming of limited settings as permitted through PC programming.
PROGRAM/
PAUSE
Note
means default value throughout this manual.
Programming Structure
Programming
Number
[0XX]
[1XX]
[2XX]
Fixed Buttons
KX-T7600
FLASH/
RECALL
TRANSFER
INTERCOM
System Password for Administrator
#
—for PT Programming
= 1234
System Password for User
—for PT Programming
= 1234
Programming Group Title
Basic Programming
System Management
Programming
Timer Programming
KX-T7400/KX-T7500
*1
FLASH
TRANSFER
INTERCOM
Programming No.
Programming No.
Frequently used programming steps
Global system parameters
System timers
2.1.1 Programming Instructions
Function
FLASH
CLEAR
SECRET
3 digits
3 digits
Description
PT Programming Manual 19