Advertisement
FIT AND SECURE
2
2.4
2.5
2.6
RRAC248_REV_A00
Apply anti-rust around all the holes. Place
some silicone around each hole.
Option A
Secure the Pro Tank Strap (Sold Seperately)
4mm
and the Mounting Bracket (Item 1) using
M6 x 25 Button Head Bolt, M6 x 19 x 1.2 Flat
Washers and M6 Nyloc Nuts (Items 2, 5 & 6).
Option B
10mm
Secure the Pro Tank Strap (Sold Seperately)
and the Mounting Bracket (Item 1) using M6
x 25 Button Head Bolts (Item 2).
Anti-
Rust
Sealant
Place the PSA Strips (Item 7) below the Pro
Water Tank as shown in 2.5.
Clean the area using a rag and denatured
alcohol.
Remove the Backing and stick The PSA
Denatured
Strips (Item 7) to the position identified
Alchohol
earlier.
If you are fitting the tap apply thread tape to
the thread of the tap.
This will allow the Tap to be aligned to your
chosen position and have a water tight seal.
Thread
Tape
Sold Seperately
Tap - WTAN059
Pro Water Tank / 42L - WTAN062
24mm
Pro Tak Strap - RRAC179
3
© 2022 FRONT RUNNER VEHICLE OUTFITTERS
Advertisement
