Advertisement
FIT AND SECURE
2
2.1
2.2
D
2.3
RRAC248_REV_A00
A
B
1
C
4
5mm
13mm
Marker
4mm
6.5mm
D
12mm
4mm
8
3
3
Assemble A, B and C (supplied with
RRAC179) to the Mounting Bracket (Item 1).
Determine where the Pro Water Tank
(Sold Seperately) will be Mounted. Loosly
fit the Pro Tank Strap (Sold Seperately) and
Pro Water Tank (Sold Seperately) to the
Mounting Bracket (Item 1).
Mark holes (D) as shown.
Option A
Drill a 4mm Pilot hole and open to 6.5mm if
you want to Secure the Mounting Bracket
using M6 x 25 Button Head Bolt, M6 x 19 x
1.2 Flat Washer and M6 Nyloc Nuts (Items
2, 5 & 6).
Option B
Drill a 4mm Pilot hole and open to 12mm if
you want to Secure the Mounting Bracket
using M6 x 25 Button Head Bolts and M6
Jack Nuts (Items 2 & 3). Apply anti-rust
before 2.3.
Only Proceed with this step when using
mounting option B.
Insert an M6 x 30 Button Head Bolt (Item 8)
into the side of the Jack Nut Tool (Item 4).
Loosely fit a jack nut (Item 3) to the button
head bolt as shown.
Insert the Jack Nut (Item 3) into the 12mm
hole.
Using a cordless driver and a 4mm allen
cordless bit, set the jack nut into the hole
while holding onto the handle of the Jack
Nut Tool (Item 4).
Repeat for the other holes.
© 2022 FRONT RUNNER VEHICLE OUTFITTERS
Advertisement
