Mitsubishi Electric LOSSNAY VL-5050SR2-E Handbook page 20

(4) Remove the display circuit board (VL-35-B).
[1] Unscrew the screw (one PTT screw 4x12, indi-
cated by ), and remove the display circuit board
parts together with the LED case cover and LED
case.
Reassembly precaution
Tightening torque for the screw: 1.1 N . m
[2] Remove the LED case cover, and unscrew the
screw (one PPT screw 3x8, indicated by
Reassembly precaution
Tightening torque for the screw: 0.7 N . m
[3] Disconnect the connector from the display circuit
board, and remove the circuit board (VL-35-B).
Reassembly precaution
Securely connect the connector to the display
circuit board.
).
Display circuit board (VL-35-B)
─ 20 ─
LED case cover
LED case
Connector