Product Makes Noise When It Sits For A While; Copies Have Incorrect Or Faint Colors - Epson C11CK57201 User Manual

Product Makes Noise When It Sits for a While

Your product is performing routine maintenance. This is normal.
Parent topic:

Copies Have Incorrect or Faint Colors

If your copies have incorrect, uneven, smeared, or faint colors, try these solutions:
• Run a print head nozzle check to see if any of the nozzles are clogged. Then clean the print head, if
necessary.
• Do not press too hard on the original when you copy from the scanner glass.
• Clean the scanner glass with a soft, dry, lint-free cloth or use a small amount of glass cleaner on the
cloth, if necessary. Paper towels are not recommended.
Caution: Do not spray glass cleaner directly on the scanner glass.
• Clean the ADF.
• Wipe any dirt or dust off of your originals.
• If the colors are smeared, try lowering the copy density setting on the LCD screen.
• Make sure your paper is not curled.
• When vertical banding appears or the paper is smeared, clean the paper path.
• When horizontal banding appears or the top or bottom of the paper is smeared, load paper in the
correct direction and slide the edge guides to the edges of the paper.
• If the back of the original appears in your printout, place a piece of black paper on the back of the
original and copy it again. You can also try lowering the Density setting.
Parent topic:
Related concepts
Print Head Nozzle Check
Print Head Cleaning
Related tasks
Cleaning Your Product
Solving Copying Problems
Solving Copying Problems
254