Table of Contents
Advertisement
Hardware Setup
Tools and Parts for Component Installation
Please prepare below tools and parts before setting up your Synology NAS:
• A screwdriver
• At least one 2.5" SATA drive (please visit
Warning:
If you install a drive that contains data, the system will format the drive and erase all existing data.
Please back up any important data before installation.
• Rail mounting kit (please see the Optional Accessories section to find out the suitable rail kit for cabinet
installation)
Warning:
We suggest mounting your Synology NAS on a cabinet before installing any drives since the heavy
weight will increase the installation difficulty.
Install Drives
Please follow the steps below for drive installation:
1 Open the drive tray.
a Press the small button located on the left side of the drive tray handle. The drive tray handle pops out.
b Pull the drive tray out by its handle as shown below.
2 Install drives:
• For 2.5" drives: Place the drive in the drive tray. Turn the tray upside down and tighten screws into the four
spots indicated below to secure the drive in place.
12
www.synology.com/compatibility
for compatible drive models)
2
Chapter
Advertisement
Table of Contents
