Hardware Setup
Tools and Parts for Component Installation
Please prepare below tools and parts before setting up your expansion unit:
• A screwdriver
• At least one 3.5"/2.5" SAS/SATA drive (please visit
models)
Warning:
If you install a drive that contains data, the system will format the drive and erase all existing data.
Please back up any important data before installation.
• Rail mounting kit (please see the Optional Accessories section to find out the suitable rail kit for cabinet
installation)
Warning:
We suggest mounting your expansion unit on a cabinet before installing any drives since the heavy
weight will increase the installation difficulty.
Install Storage Drives
Please follow the steps below for drive installation:
1 Open the front top cover.
1 Find the small button located at the left side of the drive tray handle. Press the button down, and the drive
tray handle will pop out.
2 Pull the drive tray handle out as illustrated below.
2 Load drives in the drive trays.
1 For 3.5" drives: Place the drive in the drive tray. Then tighten the screws and secure the drive in place.
10
www.synology.com/compatibility
2
for compatible drive
Chapter