Table of Contents
Advertisement
Hardware Setup
Chapter 2:
Tools and Parts for Drive Installation
A screwdriver
At least one 3.5" or 2.5" SATA drive (please visit
Warning:
If you install a drive that contains data, the system will format the drive and erase all data. If you still need
the data, please back it up before installation.
Install Drives
1 Find the small button located on the drive tray handle. Press the button down and pull the drive tray handle out
as illustrated below.
2 Load drives in the drive trays:
For 3.5" drives: Place the drive in the drive tray. Turn the tray upside down and tighten screws into the four
spots indicated below to secure the drive.
7
www.synology.com
for compatible drive models.)
C h a p t e r
2
Advertisement
Table of Contents
