Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Synology NAS SA3200D
Summary of Contents for Synology NAS SA3200D
- Page 1 Synology NAS SA3200D Hardware Installation Guide...
-
Page 2: Table Of Contents
Expansion Unit Deployment and Topology Start up Your Synology NAS LED Indicator Table Chapter 3: System Maintenance Replace System Fan Replace Power Supply Unit (PSU) Initial Troubleshooting Guide Chapter 4: Initialize DSM on Synology NAS Initialize DSM with Web Assistant Learn More Synology_HIG_SA3200D_20191003... -
Page 3: Chapter 1: Before You Start
Chapter Before You Start Synology NAS SA3200D is an enterprise server consisting of both system hardware and the software operating system, DiskStation Manager (DSM). This manual will guide you through all configuration aspects of your SA3200D, including the hardware components, setup procedures, system maintenance, and initial troubleshooting instructions. -
Page 4: Synology Sa3200D At A Glance
Description 1. Press to power on your Synology NAS. Power Button and 2. To power off the Synology NAS, press and hold until you hear Indicator a beep sound and the Power LED starts blinking. Displays the status of the HA (High Availability). For more HA Status Indicator information, see "LED Indicator Table."... - Page 5 For more information, see "LED Indicator Table." Displays the status indicating whether the controller is removable. Remove Indicator For more information, see "LED Indicator Table." For more information about Synology Expansion Unit supported by your Synology NAS, please visit www.synology.com. 5 Chapter 1: Before You Start...
-
Page 6: Hardware Specification
• Basic • JBOD • RAID 0 • RAID 1 Supported RAID Type • RAID 5 • RAID 6 • RAID 10 • Synology RAID F1 • FCC Class A • CE Class A • BSMI Class A Agency Certification •... -
Page 7: Optional Accessories
Optional Accessories With Synology accessories, you can customize your Synology NAS to fit different business environments without worrying about compatibility and stability. Visit www.synology.com/compatibility for more information. • Memory Module Model Name Picture Description D4EC-2666-8G 8 GB D4EC-2666 ECC U-DIMM... - Page 8 • Expansion Unit Model Name Picture Description 12-bay Rackmount type expansion RXD1219sas unit, compatible with 3.5”/2.5” SAS drives, up to 2 units connections • Rail Kit Model Name Picture Description RKS1317 Sliding rails solutions • Spare Part Model Name Picture Description Disk Tray (Type R7) 3.5"/2.5"...
-
Page 9: Safety Instructions
Safety Instructions Keep away from direct sunlight and away from chemicals. Make sure the environment does not experience abrupt changes in temperature or humidity. Place the product right side up at all times. Do not place near any liquids. Before cleaning, unplug the power cord. Wipe with damp paper towels. Do not use chemical or aerosol cleaners. -
Page 10: Chapter 2: Hardware Setup
• Rail mounting kit. (please see the Optional Accessories section to find out the suitable rail kit for cabinet installation) Warning: We suggest mounting your Synology NAS on a cabinet before installing any drives since the heavy weight will increase the installation difficulty. Install Drives... - Page 11 • For 2.5” drives: Place the drive in the drive tray. Turn the tray upside down and tighten screws into the four spots indicated below to secure the drive. 3 Insert the loaded drive tray into the empty drive bay. Note: Make sure the tray is pushed in all the way.
-
Page 12: Install Memory Modules
Install Memory Modules You must install genuine Synology memory module(s) to ensure system compatibility and reliability. Be sure to follow the configurations below for the suggested installation sequence of different memory capacities, otherwise the system may not boot successfully, or system performance and stability may suffer. - Page 13 3 Press the release button on the rear top cover. Slightly push backward to lift the rear top cover. When you remove the rear top cover, the sensitive internal components are exposed. Avoid touching Note: anything other than the memory assembly when you remove or add memory. 4 Insert the new memory module in the slot: a Push the retaining clips on the slot out to the sides.
- Page 14 5 Put back the rear top cover removed in step 3: a Align the front side of rear top cover with the slots on the chassis’ edge. b Align the notch on the chassis to the "open" next to the release button as shown below. c Slightly push the rear top cover back to "closed".
-
Page 15: Install Pcle Add-In Cards
To make sure SA3200D recognizes the new memory capacity: 1 Log in to DSM as admin or a user belonging to the administrators group. 2 Check Total Physical Memory Control Panel > Info Center. To remove the RAM Module: 1 Follow step 1 to 3 of the To install the RAM module section to shut down your SA3200D, disconnect the cables, pull out one controller and remove the rear top cover of the controller. -
Page 16: Install And Remove Rail Kits
d Turn the screw clockwise to secure the newly inserted card. 4 Repeat step 3 to install the other network interface card for the other controller. 5 Put back the rear top cover by following step 5 of the To install the RAM module section. Install and Remove Rail Kits Here we use RKS1317 as an example to illustrate how to install or remove the rail kits. - Page 17 3 Align the fixing holes of the inner rail to the side of the chassis and slide backward to attach the inner rail. 4 With the help of another person, carefully align the inner rail to the outer rail assembly. 5 Pull and hold the front latch of the inner rail to unlock the inner rail, and push the chassis towards the rack.
-
Page 18: Expansion Unit Deployment And Topology
SA3200D supports working with up to two RXD1219sas (12-bay) expansion units, providing seamless storage expansion whenever needed. This section will guide you through how to connect the expansion units to your Synology NAS. To connect RXD1219sas with SA3200D: 1 Connect one end of mini-SAS HD cable to the SAS port of your SA3200D and the other to the SAS-IN port of RXD1219sas. - Page 19 SA3200D will be displayed in sequence on the back panel. Note: Even with the Synology NAS and expansion unit(s) powered on, you can still expand with one or two expansion unit if needed. To do so, repeat above steps to connect the expansion cables and power cords of the other expansion units.
-
Page 20: Start Up Your Synology Nas
4. If either of the controllers is powered on, press the power button and hold for about 10 seconds and the system will be forced to shut down. Congratulations! Your Synology NAS is now online and detectable from a network computer. 20 Chapter 2: Hardware Setup... -
Page 21: Led Indicator Table
Please try to restart your Synology NAS or re-insert the drive(s), and then run the HDD/SSD manufacturer's diagnostic tool to check the health status of the drive(s). If you can log into DSM, please run the built-in S.M.A.R.T. test to scan the drive(s). If the problem remains unresolved, please contact Synology Technical Support for help. - Page 22 Power supply unit normal PSU Indicator Power supply unit off Note: This table is applicable to Synology NAS running DSM 6.2.3 and earlier. For DSM 6.2.4 and above, please refer to this article for the latest information. 22 Chapter 2: Hardware Setup...
-
Page 23: Chapter 3: System Maintenance
Chapter System Maintenance Replace System Fan If a system fan malfunctions, please see the instructions below to replace the malfunctioning fan of SA3200D. 1 Follow step 1 and 2 of the To install the RAM module section to shut down your SA3200D, disconnect the cables and pull out one controller. -
Page 24: Replace Power Supply Unit (Psu)
• What should I do if my Synology NAS cannot recognize installed drives? • How do I know whether the problem is with my Synology NAS or drive when drive errors occur? • • Memory Are there any requirements for installing or expanding system memory capacity? •... -
Page 25: Chapter 4: Initialize Dsm On Synology Nas
3 Enter either of the following into the address bar of your browser: find.synology.com synologynas:5000 4 Web Assistant will be launched in your web browser. It will search for and find the Synology NAS within the local network. The status of the SA3200D should be Ready. 5 Click Connect to start the setup process and follow the onscreen instructions. - Page 26 Section 5. License Limitations. The license set forth in Sections 1, 2 and 3 applies only to the extent that you have ordered and paid for the Product and states the entirety of your rights with respect to the Software. Synology reserves all rights not expressly granted to you in this EULA.
- Page 27 Arbitration Law and related enforcement rules of the country in which Synology Inc. was organized. In such cases, the arbitration will be limited solely to the dispute between you and Synology. The arbitration, or any portion of it, will not be consolidated with any other arbitration and will not be conducted on a class-wide or class action basis.
- Page 28 Section 3. Limited Warranty and Remedies 3.1 Limited Warranty. Subject to Section 3.2, Synology warrants to the Customer that each Product (a) will be free of material defects in workmanship and (b) under normal use will perform substantially in accordance with Synology's published specifications for the Product during the Warranty Period.
- Page 29 Section 4. Limitations of Liability 4.1 Force Majeure. Synology will not be liable for, or be considered to be in breach of or default under this Warranty on account of, any delay or failure to perform as required by this Warranty as a result of any cause or condition beyond its reasonable control (including, without limitation, any act or failure to act by Customer).
- Page 30 Association, except as otherwise provided below. The arbitration will be conducted before a single arbitrator, and will be limited solely to the dispute between Customer and Synology. The arbitration, or any portion of it, will not be consolidated with any other arbitration and will not be conducted on a class-wide or class action basis.
- Page 31 FCC Declaration of Conformity This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
- Page 32 この装置は、クラス A 機器です。この装置を住宅環境で使用すると電波妨 害を引き起こすことがあります。この場合には使用者が適切な対策を講ずる よう要求されることがあります。 VCCI 一 A...