Hardware Setup
Tools and Parts for Component Installation
Please prepare the tools and parts below before setting up your expansion unit:
• A Screwdriver
• At least one 2.5" SAS/SATA drive (please visit
models).
Warning:
If you install a drive that contains data, the system will format the drive and erase all existing data.
Please back up any important data before installation.
• Rail mounting kit (please see the Optional Accessories section to find suitable rail kits for cabinet installation)
Warning:
We suggest mounting your expansion unit on a cabinet before installing any drives since the heavy
weight will increase the installation difficulty.
Install Drives
Please follow below steps for drive installation:
1 Open the drive tray.
a Find the small button located at the bottom side of the drive tray handle. Press the button down, and the
drive tray handle will pop out.
b Pull the drive tray handle out as illustrated above.
2 Place the drive in the drive tray. Tighten the screws provided to secure the drive in place.
3 Insert the loaded drive tray into the empty drive bay.
Note:
Make sure the tray is pushed in all the way. Otherwise, the drive might not be able to function properly.
10
www.synology.com/compatibility
for compatible drive
2
Chapter