Table of Contents
Advertisement
Replace Power Supply Unit (PSU)
If a PSU or its fan malfunctions, please follow the steps below to replace the malfunctioning PSU.
1 Unplug the power cord from the PSU that is to be replaced.
Note:
By pressing the Beep Off button, you can silence the long beep when it sounds.
2 On the rear panel, push the lever of the PSU inward as shown. Pull the PSU out of your FS2500.
3 Prepare a new PSU. Insert it into the empty slot until you hear a click.
26 Chapter 3: System Maintenance
Advertisement
Table of Contents
