Renesas EK-RA6M3 Getting Started page 35

Renesas RA Family Getting Started with Low Power Applications for RA6 and
RA4 Groups
Create a new pin configuration file named RA6M2-EK-LPM.pincfg in the same project folder by using
Manage configuration, duplicating RA6M2-EK.pincfg and renaming it to RA6M2-EK.pincfg.
Figure 35. Create a New Pin Configuration
Select the RA6M3-EK-LPM.pincfg and uncheck the Generate Data box to deselect the old pin configuration.
Figure 36. Deselect the Old LPM Pin Configuration
Select the newly created RA6M2-EK-LPM.pincfg and check the Generate Data box. You can disable
unused pins and peripherals and generate the pin configuration for LPM, for example, disabling SCI7 as
shown in Figure 37.
R11AN0471EU0104 Rev.1.04 Page 35 of 40
Oct.1.21